Nipros ES-500P System Connection Manual Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Příslušenství pro video Nipros ES-500P System Connection Manual. Nipros ES-500P System Connection Manual User Manual [ru] Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 6
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Adjusts the audio level of INTERCOM HEADSET
DL-400 connected to HEADSET connector
(XLR 4-pin) on the connector panel.
-1. Adjusts the microphone volume level.
-2. Adjusts the headphone volume level.
-3. Adjusts the SIDETONE volume level to hear
your own voice properly.
INTERCOM HEADSET
MIC volume,
H.P volume and
SIDE TONE volume
TALLY indicator
Lights up when receiving
the tally signal from ES-600P.
PEAK indicator
Lights on when the input signal
to AUDIO IN connector is over
level even momentarily.
METER SELECT switch
Selects the Meter mode,
VU mode or PEAK mode.
METER LIGHT switch
Turns on or off the light of
the VU/PEAK meter.
VU/PEAK meter
Used to confirm the input signal
level to AUDIO IN connector.
METER SELECT switch selects
VU or PEAK mode.
VU(VU meter) : from -20dB
to +3dB
(indicated in upper scale)
PK(PEAK program meter) :
from -60dB to 0dB
(indicated in lower scale)
The rated level of the output
signal of ES-600P is - 20dBm
when VU meter indicates 0dB
or PEAK meter indicates -20dB.
TALK ON/OFF switch
Turns on/off the microphone
of the intercom headset.
MONITOR SELECT switch
LIMIT switch
LEVEL volume
Turns on/off the Hyper Limiter.
When set to ON position, the limiter works up
to +30dB to prevent the distortion of the audio
output to ES-600P.
Adjusts the audio input level from a camcorder.
INPUT LEVEL switch
Select the appropriate position according to
the input level connected to the AUDIO IN
connector on the connector panel.
+4dB : When a line-level (+4 dBm)
signal source is connected.
-20dB : When a line-level (-20 dBm)
signal source is connected.
-60dB : When a microphone (-60dBm)
is connected.
In case of using a codenser
microphone, set the P-MIC
switch to the 48V position.
POWER switch
Turns the power on and off.
(main panel)
Select the INTERCOM or the AUDIO IN position
to monitor the audio signal on INTERCOM line
or the audio signal to AUDIO IN connector by
the headset connected to HEADSET connector
on the connector panel.
P-MIC switch
When using a phantom 48V condenser microphone,
set to the 48V position to supply +48V DC power
to the microphone and select the -60dB position
of the INPUT LEVEL select switch.
INTERCOM
MIC
H.P
ES-500
CAMERA ADAPTER
MIN
MAX
MIN
MAX
POWER
OFF
ON
+4dB
-20dB
-60dB
48V
OFF
P-MIC
METER
SELECT
HYPER LIMITER
TALLY
VU
PK
PEAK
MONITOR
SELECT
INTERCOM
AUDIO IN
MIN
MAX
ON
OFF
LIMIT
LEVEL
INPUT LEVEL
AUDIO INPUT
METER
LIGHT
ON
OFF
TALK
ON
OFF
SIDE
TONE
1
For using ES-500P/ES-600P.
ES-500P Outsideview / Parts Names and Functions (Main panel)
Operating
Instructions
TM
ES-500P/ES-600P incorporates the REMOTE connector
according to the Panasonic camera remote cotroller.
ES-500P/ES-600P : for Panasonic camera
ES-500P
Camera Adaptor
NOTICE : ES-500P and ES-600P do not convert the media or format of the input signals to annother.
Zobrazit stránku 0
1 2 3 4 5 6

Shrnutí obsahu

Strany 1 - Instructions

Adjusts the audio level of INTERCOM HEADSETDL-400 connected to HEADSET connector (XLR 4-pin) on the connector panel.-1. Adjusts the microphone volume

Strany 2 - (VIDEO OUT/TC IN)

Y IN/Pb IN/Pr IN connectors (BNC×3)RET OUT connector (BNC)TALLY OUT connector (BNC)Connect the HD/SD analog componentsignals(Y/ Pb(B-Y)/ Pr(R-Y)) from

Strany 3

ES-600PBase Station1-1. Adjusts the volume level of input.-2. Adjusts the volume level of output.-3. Adjusts the volume level of SIDE TONE, return of

Strany 4

(rear)Turns when POWER switch is on.Connect with the AC 85V-240V (50/60Hz)power supply.CAMERAAUDIO OUT EXT LINE (2W I/O) EXT LINE (2W I/O)HD/SD COMPON

Strany 5 - ( )

System Connection Guide26-pin Multi-cable Studio System ES-500P/ES-600P(26-pin)DC POWERCONNECTOR PANELヘッドセットHEAD SETDL-400HD SDI OUTGENLOCKBNC CABLEHD

Strany 6 - ES-500P/ES-600P

INTERCOM HEADSET(XLR 4-pin)DL-400H.PMICSIDETONEHEADSETVolume<2-wire Intercom Line>OUTINSIDETONEEXT LINE (4W I/O) VolumeEXT LINE (2W I/O)(XLR 3-pin 2

Komentáře k této Příručce

Žádné komentáře